AINAS
CWWK X86-P6 Pocket NAS NAS

CWWK X86-P6 Pocket NAS

AI CapableCWWK

Why AI Capable: Intel N150 (or i3-N355) with no NPU, Intel UHD iGPU only, no PCIe or OCuLink GPU path and a 32GB largest DDR5 option, so small Docker models at best.

Updated

Can the CWWK X86-P6 Pocket NAS run local AI?

The CWWK X86-P6 Pocket NAS can run small local models, with limits. Its Intel N150 and nullGB memory ceiling suit only very small models of around 1B to 3B parameters (Estimated), so treat it as a storage-first NAS that can host light AI tools.

There is no way to add a discrete GPU, so all inference runs on the CPU.

Local LLM support is not yet verified.

The short answer

The X86-P6 Pocket NAS suits buyers who want a small, all-flash storage box they set up themselves, and it scores 20 on the AINAS Score, so AI is a side note here. It has four M.2 NVMe slots, two 2.5GbE ports and an Intel N150 CPU. There are no drive bays, so storage is M.2 only. Memory is DDR5 4800 and the board is listed as expandable, with 32GB as the largest factory option. The power supply is rated at 60W. The operating system is not stated, so you install your own. Docker and virtual machine support are not stated either. Buy it if you want compact flash storage on a network and are happy to configure the software yourself. It is sold barebone with no memory or storage, or with 8GB, 16GB or 32GB of DDR5 already fitted.

The limit that rules it out for many buyers is local AI. It has no GPU path, with no PCIe slot, OCuLink or USB4, and the vendor confirms GPU expansion is not supported. Every model listed on this page, from Llama 3.2 3B up, is marked as not fitting at Q4 or Q8 (Estimated). Local LLM and Ollama support are limited and unconfirmed. Ollama and Open WebUI depend on an operating system you install yourself. Anyone who wants to run language models at home should look for a system with a PCIe slot, OCuLink or USB4 for a graphics card, an NPU, and a memory ceiling above 32GB. Check that the vendor confirms container support. This box suits file storage and network duties, not model work.

Current offers

  • Amazon UK

    N150, barebone (no RAM, no storage)

    £281.31

    Verified

    In stock

    Buy on Amazon
  • Amazon UK

    N150, 16GB DDR5, 256GB NVMe

    £645.77

    Verified

    In stock

    Buy on Amazon

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.co.uk or Amazon.com, as applicable, at the time of purchase will apply to the purchase of this product.

Price history

Current
£281.31
30-day average
£281.31
90-day low
£281.31
All-time tracked low
£281.31
£280£281£28320 AugToday
Last in-stock Amazon UK price we verified each day. Dashed line: 30-day average. Days out of stock are not drawn as prices.

Key specifications

Cores
Not stated
Source: Manufacturer
Included RAM
None (barebone)
Source: Manufacturer
Maximum RAM
Not stated
Source: Manufacturer
Networking
2 x 2.5GbE
Source: Manufacturer
GPU expansion
None
Source: Manufacturer
Power supply
60W
Source: Manufacturer
Docker
Not stated
VM support
Not stated
Released
2025
Segment
All-flash

Can the X86-P6 Pocket NAS run local LLMs?

Each capability shows how it was confirmed: Verified by AINAS, Vendor confirmed, Community confirmed or Unverified.

CapabilitySupportedEvidenceNote
Local LLMLimitedUnverifiedN150 CPU-only, up to 32GB factory option; no evidence.
OllamaLimitedUnverifiedDepends on user-installed OS; no evidence.
Open WebUILimitedUnverifiedDepends on user-installed OS; no evidence.
RAGLimitedUnverifiedNo evidence.
AI search NoUnverifiedNo NAS software bundled.
GPU expansion NoVendor confirmedNo PCIe slot, OCuLink or USB4.
Hardware accelerationLimitedUnverifiedIntel N-series iGPU (Quick Sync) presumed but not named on the CWWK page.
AI photosLimitedUnverifiedSelf-hosted only; no evidence.
AI video NoUnverifiedNot listed.
Surveillance AILimitedUnverifiedSelf-hosted only; no evidence.

What AI models can the X86-P6 Pocket NAS run?

Calculated from the X86-P6 Pocket NAS's memory and each model's published size at each quantization. Rows marked Estimated are calculations, not benchmarks. Check any model.

ModelBest quantizationRuns?Memory neededExpected performanceVerification
Llama 3.2 3BLlama, 3.21BNone fitsNo11GB at Q4Not measuredEstimated
Llama 3.1 8BLlama, 8.03BNone fitsNo14GB at Q4Not measuredEstimated
Qwen3 8BQwen, 8.19BNone fitsNo15GB at Q4Not measuredEstimated
Gemma 3 12BGemma, 11.8BNone fitsNo18GB at Q4Not measuredEstimated
Qwen3 14BQwen, 14.8BNone fitsNo20GB at Q4Not measuredEstimated
Phi-4 14BPhi, 14.7BNone fitsNo19GB at Q4Not measuredEstimated
Mistral Small 3 24BMistral, 23.6BNone fitsNo25GB at Q4Not measuredEstimated
Gemma 3 27BGemma, 27BNone fitsNo29GB at Q4Not measuredEstimated
Qwen3 30B A3BQwen, 30.5BNone fitsNo31GB at Q4Not measuredEstimated
Qwen3 32BQwen, 32.8BNone fitsNo32GB at Q4Not measuredEstimated
DeepSeek-R1 32B (Qwen distill)DeepSeek, 32.8BNone fitsNo32GB at Q4Not measuredEstimated
Llama 3.3 70BLlama, 70.6BNone fitsNo60GB at Q4Not measuredEstimated
Llama 4 Scout 17Bx16ELlama, 109BNone fitsNo89GB at Q4Not measuredEstimated
Qwen2.5 72BQwen, 72.7BNone fitsNo65GB at Q4Not measuredEstimated
Mistral Large 2 123BMistral, 123BNone fitsNo96GB at Q4Not measuredEstimated

Workload fit

One verdict per workload, from the X86-P6 Pocket NAS's use-case scores and capability rows. Unknown means we cannot confirm it, not that it probably works.

Local LLMUnknown

We cannot confirm local LLM use on the X86-P6 Pocket NAS. Local LLM support is limited and Unverified, the notes say CPU-only on the N150 with up to 32GB as a factory option, and every model listed on this page is an Estimated no fit.

Private RAGUnknown

Private RAG is unconfirmed here, so we cannot call it a match. The RAG capability is limited and Unverified with no evidence, and Open WebUI and Ollama both depend on an operating system you install yourself, with none stated.

AI searchPoor fit

AI search is a poor fit on the X86-P6 Pocket NAS. AINAS lists it as no, because no NAS software is bundled, and that entry is Unverified, so any search tool would be something you add and test yourself.

AI photosUnknown

We cannot confirm AI photo features on the X86-P6 Pocket NAS. Support is limited and Unverified, the notes say it is self-hosted only with no evidence, and no NPU is listed, so it would depend on the CPU alone.

SurveillanceUnknown

We cannot confirm surveillance use on the X86-P6 Pocket NAS. Support is limited and Unverified, self-hosted only with no evidence, and there are no drive bays, so storage is limited to the four M.2 slots.

Home labUnknown

We cannot confirm home lab suitability for the X86-P6 Pocket NAS. It has four M.2 slots and two 2.5GbE ports, but the operating system, Docker support and virtual machine support are all unstated for this system.

BusinessPoor fit

Business use is a poor fit for the X86-P6 Pocket NAS. It has no ECC memory, no drive bays and no stated warranty term, and no operating system or Docker support is stated by the vendor.

Creative AIUnknown

We cannot confirm creative AI on the X86-P6 Pocket NAS. GPU expansion is not supported (vendor confirmed), hardware acceleration is limited and Unverified, and local LLM support is also limited and Unverified, with the iGPU presumed but not named by the vendor.

How much RAM does the X86-P6 Pocket NAS support?

The X86-P6 Pocket NAS supports up to an unstated amount ofGB of DDR5 4800.

Can you add a GPU to the X86-P6 Pocket NAS?

No. The X86-P6 Pocket NAS has no PCIe slot or OCuLink port for a graphics card. Inference runs on the CPU, so keep to small models.

Is the X86-P6 Pocket NAS suitable for RAG?

With limits. The X86-P6 Pocket NAS can host a small RAG stack such as AnythingLLM or Open WebUI with a compact embedding model, but memory and compute restrict how large the answering model can be. It suits a personal document library more than a team knowledge base.

Networking is 2 x 2.5GbE. Fine for one or two users; indexing a large archive over the network will be slower.

Limitations

  • No GPU path: there is no PCIe slot, OCuLink or USB4, and the vendor confirms GPU expansion is not supported, so memory and the CPU are all you have for AI.
  • Every model listed on this page is an Estimated no fit at both Q4 and Q8, starting with Llama 3.2 3B, so do not plan on local LLM use.
  • There is no ECC memory and no NPU. Storage is limited to four M.2 NVMe slots, with no drive bays, so there is no room for hard disks.
  • Networking is two 2.5GbE ports only. There is no 5GbE or 10GbE, and no Thunderbolt or USB4 for faster links.
  • The operating system, Docker support and virtual machine support are not stated, and every AI capability listed is Unverified or marked no, so you must test software yourself.

Which X86-P6 Pocket NAS configurations are sold?

ConfigurationRAMSSDNotes
N150, barebone (no RAM, no storage)NoneNone
i3-N355, bareboneNoneNone
N150, 8GB DDR5, 128GB NVMe8GB128GB
N150, 16GB DDR5, 256GB NVMe16GB256GB
N150, 32GB DDR5, 1TB NVMe32GB1TB

Who should buy the X86-P6 Pocket NAS?

The X86-P6 Pocket NAS scores best for Business (23/100) and Home Lab (22/100). It suits small offices that need shared storage with private AI tools and room to grow.

It is a weaker fit for anyone who wants to run models larger than about 8B parameters and for buyers who expect to add a graphics card later.

What are the alternatives to the X86-P6 Pocket NAS?

Other AI Capable systems closest in price.

TerraMaster F2-425

TerraMaster F2-425

TerraMaster

AI Capable

16GB max RAM · 2 bays · 2.5GbE

AINAS Score 30

£279.99

Amazon UK · Verified

View
UGREEN DXP2800

UGREEN DXP2800

UGREEN

AI CapableDiscontinued

16GB max RAM · 2 bays · 2.5GbE

AINAS Score 31

$379.98$439.99

Amazon US · Verified

Ships from the US; delivery and import charges shown at checkout

View
Aoostar R7

Aoostar R7

Aoostar

AI Capable

2 bays · 2 x 2.5GbE

AINAS Score 22

No verified price

View

Where does the X86-P6 Pocket NAS rank?

Buying guides that list it

Common questions

Can the X86-P6 Pocket NAS run Llama 3.2 3B?

No. Llama 3.2 3B needs 2GB at Q4 and 3.4GB at Q8, and it is marked as not fitting at either level (Estimated). That is a calculation, not a benchmark. Every larger model listed on this page is also an Estimated no fit. Local LLM support on the X86-P6 Pocket NAS is limited and Unverified, and the notes describe it as N150 CPU-only with no evidence.

Can you upgrade the memory in the X86-P6 Pocket NAS?

Yes, the memory is listed as expandable. It is DDR5 4800, and the barebone version comes with no memory fitted. The largest factory option is 32GB, and the maximum the board accepts is not published. CWWK does not confirm other limits, so check with CWWK before fitting a larger module. Factory configurations come with 8GB, 16GB or 32GB of DDR5.

Can the X86-P6 Pocket NAS take a graphics card?

No. The vendor confirms GPU expansion is not supported, with no PCIe slot, OCuLink or USB4 listed. The system has two USB 3.2 ports only. It has no Thunderbolt ports and no USB4 ports. The only graphics hardware is the Intel iGPU, which is presumed but not named on the vendor page, and hardware acceleration is limited and Unverified, so there is no external GPU route.

Which configurations of the X86-P6 Pocket NAS are sold?

Five are listed. Four use the Intel N150: a barebone with no memory or storage, 8GB of DDR5 with a 128GB NVMe drive, 16GB with 256GB, and 32GB with a 1TB NVMe drive. The fifth is an i3-N355 barebone. Every version has the same four M.2 NVMe slots, two 2.5GbE ports and a 60W power supply, and none states an operating system, so you install your own. The 32GB version is the largest factory memory option, and CWWK does not publish a maximum.

Does the X86-P6 Pocket NAS have M.2 slots?

Yes, four. The vendor image shows a PCIe 3.0 x4 M.2 connection on the core board split into four M.2 NVMe 2280 slots at x1 each, through an adapter board. There are no drive bays, so M.2 is the only storage. That suits all-flash use. Plan around x1 links per drive when thinking about throughput. Fitted versions include 128GB, 256GB or 1TB of NVMe.

Does the X86-P6 Pocket NAS run Docker?

No, Docker is not confirmed for the X86-P6 Pocket NAS, and neither is the operating system, because it is sold as a Pocket NAS or board PC with no OS listed. Ollama and Open WebUI are limited and Unverified, and both depend on the operating system you install. Virtual machine support is not stated either. You would need to confirm container support yourself.

Can the X86-P6 Pocket NAS run Ollama?

Partly. Ollama support is not yet verified. See the capability table above for the source.

Does Open WebUI work on the X86-P6 Pocket NAS?

Partly. Open WebUI support is not yet verified. See the capability table above for the source.

Does the X86-P6 Pocket NAS do AI photo recognition?

Partly. AI photos support is not yet verified. See the capability table above for the source.

Can the X86-P6 Pocket NAS run AI surveillance?

Partly. Surveillance AI support is not yet verified. See the capability table above for the source.

Does the X86-P6 Pocket NAS have hardware AI acceleration?

Partly. Hardware acceleration support is not yet verified. See the capability table above for the source.

How fast is the X86-P6 Pocket NAS's network?

It has 2 x 2.5GbE built in. The fastest port is 2 x 2.5GbE.

Where do these specifications come from?

Every field records its source. Specifications were last checked on . Spot an error? Send a correction with a manufacturer link.